Hello,
Trying to add the following from a SAN-OS fabric switch to a NX-OS switch:
- aaa new-model
aaa authentication login default group tacacs+ local
aaa authentication enable default group tacacs+ enable
aaa authentication ppp default local
aaa authorization exec default group tacacs+ local
aaa authorization commands 15 default group tacacs+ local
aaa accounting exec default start-stop group tacacs+
aaa accounting commands 1 default start-stop group tacacs+
aaa accounting commands 15 default start-stop group tacacs+
NX-OS took aaa authorization exec default group tacacs+ local, but does not like aaa authorization commands 15 default group tacacs+ local. How does one assign priviledges to tacacs+ logins?
Thank you in advance.