03-25-2009 10:18 AM - edited 03-10-2019 04:24 PM
We have a problem were replication from the primary ACS to the secondary ACS is failing. Yesterday morning, a scheduled replication worked just fine, but last night I attempted a manual "replicate now" and recieved the following error "Error (-16) trying to contact ACS 'ACS2'" and it has been failing ever since with the following error "Cannot replicate to 'ACS2' - server not responding". We even put a sniffer outside of the primary and are not seeing the replication traffic even attempt to go out of the primary. All settings have been verified over and over. What does the first error code that I mentioned mean?
03-25-2009 10:40 AM
Settings are as follows:
-Primary ACS->Network Conf->NDG AAA Svrs two entries itself with real ip and the secondary server with it's real ip, both with the same key
-Primary ACS->Sys Conf->ACS Intern DB Rep
-Rep Components(Send) - User n Group DB, Net Config Device tables, int config, int sec settings and p/w validation all checked
-Partners-Replicaton-ACS2
-Inbound - any
Secondary ACS->Network Conf->NDG AAA Svrs - two entries itself with real ip and the secondary server with it's real ip, both with the same key
Secondary ACS->Sys Config->ACS Intern DB Rep
-Rep Components(rcv) - User n Group DB, Net Config Device tables, int config, int sec settings and p/w validation all checked
-scheduling manual
-partners - nothing under replication
-inbound replication - ACS1
I have not restarted any services or the boxes yet.
08-20-2012 05:14 PM
08-22-2012 03:34 PM
Hi Chandra,
Please refer to this doc,
https://supportforums.cisco.com/docs/DOC-8795
Regards,
~JG
Do rate helpful posts
08-22-2012 05:50 PM
everything same as in the doc...still have the same issue
08-24-2012 11:13 AM
Please open a tac case. Let me know if there is any issue.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide