ACS 4.1- LDAP Integration

[siddhartham]

We want to use ACS as a raduis server and use it for VPN user authentication

Remote Access VPN User---> ASA5510---->ACS v4.1---->LDAP

ASA is already configured for VPN, I am a newbie with ACS.Can someone explains me how to configure ACS as a radius server and integrate it with LDAP.

So when a user enters his username and password, ASA should send that to ACS and the ACS should compare it against LDAP.

Thanks

[Jatin Katyal · Accepted solution]

How to Configure ASA for Radius configuration and VPN authentication

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00808c18ff.shtml#cli

How to Configure ASA on ACS as a radius client:

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00808c18ff.shtml#acs

Verify Test authentication between ASA and ACS

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00808c18ff.shtml#veri

ACS and LDAP database Integration

After that define the hostname ( as LDAP server IP), Port as 389 and Admin username and password.

Regards,

Jatin

Do rate helpful posts-

[siddhartham]

Thanks for the help.