Network Access Control

I want to register Secondary ACS with Primary instance, but its show up following error  "This System Failure occured: server cannot be adde to the deploymnet. Server has sam License ID as server PrimaryACS that already exist in the deployment. Your ...

Hello, If I want to use 802.1X with PEAP,is it enough with the self-signed certificate that cames the ACS(for example for https)? Or I need other certificate in the ACS?Thanks in advanceRegards

Hi everybody!I want to know how to make the guest go through the web auth whereas people on an active directory (employees, staff) can just authenticate via their session login, with the SAME SSID for both.Thanks in advance,Ana Linda.

hi expertsi need your help regarding below I'm new in ISE , I configured the ISE to be integrated with the active directory , so any user want to login to the network should has username & password at the active directory . most of the users already...

helloi'm using ACS 5.3.0.40.2 and its setup with an AD External Identity store for wireless PEAP MSCHAPv2. AD is configured with Alternate UPN suffixes so that for example:22056 Subject not found in the applicable identity store(s). 　I've checked the...

Hello, we want to use standalone mac authentication bypass (with freeradius). Yesterday we tested it with a catalyst 3750 IOS 12.2(35) and it was working fine! The config on an interface looked like that:(config-if)switchport mode access(config-if)au...

Hello.Is there any way (in ACS 5.1) to assign personal access list to each user instead of assigning it to Authorization profile and Authorization profile to user?Thanks for any help.

Hello My name is Ivan. I have a ACS SE 4.2.1.15 with Agent Remote of the same version. I would like to integrate with Active Directory 2008 R2 of 32 bitsIs possible to do it?. And is possible to do it with AD 2008 R2 of 64 bits?. What options can i h...