05-18-2010 02:48 PM - edited 03-10-2019 05:08 PM
Could you please assist, I preparing to setup ACS 5.0 and integrate it with an external AD database. Would i need to make any configurations on the AD servers itself, and what settings do i need, if any?
PM.
05-18-2010 04:24 PM
You don't need to do any changes on AD. Just make sure whatever admin credentials you are using on ACS to integrate with AD should have privileges to add computer on the domain.
Joining ACS to an AD Domain
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.1/user/guide/users_id_stores.html#wp1140906
ACS 5.1 has to be configured with a valid NTP server for time synchronization, preferably from where the domain controller is syncing its time. Another one is a valid DNS server which can resolve internal names.
Both of them will be configured from the CLI:
http://www.cisco.com/en/US/partner/docs/net_mgmt/cisco_secure_access_control_system/5.1/command/reference/cli_use.html#wp1096003
HTH
JK
Do rate helpful posts-
05-19-2010 06:01 AM
JK,
Thanks so much. Will provide feedback or any other questions shortly.
PM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide