08-30-2011 06:31 PM - edited 03-10-2019 06:21 PM
Hi Guys,
I am configuring a Cisco Secure ACS 1120 appliance running ACS 5.0.0.21 to handle RADIUS request from a Cisco WLC 5508 appliance running version 7.0.116.0.
The following statements illustrate some but not all the debugging I have done to ensure each device functions as it should in isolation.
At the moment I have the
In summary the WLC and the ACS successfully function independently but they do not communicate via radius.
Any assistance appreciated Thanks
Solved! Go to Solution.
08-31-2011 08:09 AM
It seems as though you are using ACS 5.0 without any patches.
For your information the product release is now up to 5.2 and ACS 5.3 is soon to be released
I seem to remember there was an issue with ACS 5.0 operations with WLC that was resolved in patch for 5.0
I am not sure of the specific CDETS but may be:
CSCsy17858 Incorrect handling of Tunnel-Type & Tunnel-Client-Endpoint attrs
ACS 5.0 has a cumulative patch appraoch with all fixes being accumulated
My recommendation would be to download patch 8 for ACS 5.0: 5.0.0.21.8
Patch can be downloaded from CCO
To install a patch define a repository on ACS (cumulative patches are larger than 32MB so you can't use TFTP for this), copy the patch file to the repository, then on ACS' CLI:
# acs patch install
08-31-2011 06:59 AM
Check the service selection screen, is the RADIUS policy being hit at all?
08-31-2011 08:09 AM
It seems as though you are using ACS 5.0 without any patches.
For your information the product release is now up to 5.2 and ACS 5.3 is soon to be released
I seem to remember there was an issue with ACS 5.0 operations with WLC that was resolved in patch for 5.0
I am not sure of the specific CDETS but may be:
CSCsy17858 Incorrect handling of Tunnel-Type & Tunnel-Client-Endpoint attrs
ACS 5.0 has a cumulative patch appraoch with all fixes being accumulated
My recommendation would be to download patch 8 for ACS 5.0: 5.0.0.21.8
Patch can be downloaded from CCO
To install a patch define a repository on ACS (cumulative patches are larger than 32MB so you can't use TFTP for this), copy the patch file to the repository, then on ACS' CLI:
# acs patch install
09-20-2011 10:14 PM
issue resolved by upgrading from 5.0 to 5.2, Thanks for the help!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide