03-01-2013 02:10 AM - edited 03-10-2019 08:08 PM
Hello.
We are using ACS 5.3 with two servers in a distributed solution.
All logs are collected on primary server so when this server fails all logs are lost.
How can I enable log on secondary server also?
Thanks.
Andrea
03-01-2013 02:35 AM
Configuration -->logging categories --> log collector --> select the secondary
If you want to log locally and to secondary at the same time.
Configuration -->logging categories --> Remote Log Targets
create new remote logging target so that it points to the other server.
------------------------------------------------------------------------------------------------------
Please make sure to rate correct answers
03-27-2013 03:41 AM
Hello Maldehne and many thanks for your help.
I understand that with the first settings
Configuration -->logging categories --> log collector --> select the secondary - See more at: https://supportforums.cisco.com/thread/2202554?tstart=0#sthash.5mYEZitx.dpuf
Configuration -->logging categories --> log collector --> select the secondary - See more at: https://supportforums.cisco.com/thread/2202554?tstart=0#sthash.5mYEZitx.dpuf
Configuration -->logging categories --> log collector --> select the secondary
I can enable the log function on primary or on secondary server.
With the other settings I can log locally and to a remote target (the secondary server for me).
How can I view the log collected on secondary ACS? View is not running on secondary instance!
Thanks.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide