ACS 5.3, a logging solution.

[andrea.meconi]

Hello.

We are using ACS 5.3 with two servers in a distributed solution.

All logs are collected on primary server so when this server fails all logs are lost.

How can I enable log on secondary server also?

Thanks.

Andrea

[maldehne]

Configuration -->logging categories --> log collector --> select the secondary

If you want to log locally and to secondary at the same time.

Configuration -->logging categories --> Remote Log Targets

create new remote logging target so that it points to the other server.

------------------------------------------------------------------------------------------------------

Please make sure to rate correct answers

[andrea.meconi]

Hello Maldehne and many thanks for your help.

I understand that with the first settings

Configuration  -->logging categories --> log collector --> select the  secondary - See more at:  https://supportforums.cisco.com/thread/2202554?tstart=0#sthash.5mYEZitx.dpuf

Configuration  -->logging categories --> log collector --> select the  secondary - See more at:  https://supportforums.cisco.com/thread/2202554?tstart=0#sthash.5mYEZitx.dpuf

Configuration -->logging categories --> log collector --> select the secondary

I can enable the log function on primary or on secondary server.

With the other settings I can log locally and to a remote target (the secondary server for me).

How can I view the log collected on secondary ACS? View is not running on secondary instance!

Thanks.