08-26-2016 05:55 AM - edited 03-11-2019 12:02 AM
Hello everyone, I have a question about ACS compatibility.
I saw that ACS 5.3 is not compatible with AD 2012, but is it compatible with AD 2012 directory configured in functional level 2008?
Has anyone tried ? Authentication is ok ?
Thanks for your help
Solved! Go to Solution.
08-26-2016 09:44 AM
Hi,
I would like to inform that ACS 5.3 supports till 2008 R2.
http://www.cisco.com/c/en/us/td/docs/net_mgmt/cisco_secure_access_control_system/5-3/device_support/sdt53.html
If you have a forest functional level set to 2008 and domain functional level set to 2012.
I have seen ACS 5.3 does not operate correctly when attempting to attach to and authenticate users in an AD 2012 functional domain/forest.
I would recommend to upgrade ACS at least to 5.5.
Let me know if you have any further queries.
Regards
Gagan
08-26-2016 09:44 AM
Hi,
I would like to inform that ACS 5.3 supports till 2008 R2.
http://www.cisco.com/c/en/us/td/docs/net_mgmt/cisco_secure_access_control_system/5-3/device_support/sdt53.html
If you have a forest functional level set to 2008 and domain functional level set to 2012.
I have seen ACS 5.3 does not operate correctly when attempting to attach to and authenticate users in an AD 2012 functional domain/forest.
I would recommend to upgrade ACS at least to 5.5.
Let me know if you have any further queries.
Regards
Gagan
08-27-2016 07:12 AM
Hi Gagan,
Thanks for your answer. I read this note before posting but I had a doubt. Thanks a lot for your confirmation.
Best Regards
Nora
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide