This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.
I am working with ACS 5.5
For testing I have tried to get accounting messages from a 2960S switch configured with AAA new model for Authentication Authorization and Accounting using TACACS+.
Any idea why I don't see any reports regarding accounting on the ASC?
On the switch all accounting messages are being showed if "debug aaa acounting" is configured.
Where are you looking for tacacs accouting logs on ACS 5.5?
Have you look inside the below listed path:
Select Monitoring and Reports, launch Monitoring and Report Viewer, then select Monitoring and Reports > Reports > Catalog.
TACACS Accounting : Provides user or command accounting information for TACACS+ authentications for a selected time period.
**Do rate helpful posts**
Config seems fine but the reports coming out blank.
Are there any configuration that I should look for at the ACS?
Looks like another issue with ACS 5.5.
Are you running Evaluation (60 GB HDD) ACS 5.5. on vmware?
**Do rate helpful posts**
I have the same issue. Tacacs logs was working fine on 5.4 and after upgrading to 5.5, nothing new showed up, but all the past authentication did.
Sent from Cisco Technical Support iPhone App
I noticed you did not include a named accounting list commands in your entire configuration,
Then further include it in the console command.
aaa accounting exec NOTINCLUDED start-stop group Tacacs+
line con 0
accounting exec NOTINCLUDED
accounting commands 0 NOTINCLUDED
Please revert should i be missing something
I tried using the above commands but still no luck.
The accounting reports in ACS 5.5 are still enpty.
Any other idea?
Hi, but now i have a display problem with ie10!
with ie9, i am getting an error during update of shell profiles!
with firefox esr 24.5.0 i am not able to display "monitor and reports" page!
i will open a case!
ACS activity logs (RADIUS and TACACS+ authentication, accounting, authorization) show no new content.
This is observed after upgrading to ACS 5.5.
Stop and restart the log collector, using the following command:
# acs stop view-collector
Monitor the status of the ACS application and wait until the view process has stopped:
# show app status ACS
ACS role: PRIMARY
Process 'database' running
Process 'management' running
Process 'runtime' running
Process 'adclient' running
Process 'ntpd' running
Process 'view-database' running
Process 'view-jobmanager' running
Process 'view-alertmanager' running
Process 'view-collector' not monitored
Process 'view-logprocessor' not monitored
Then restart the log collector:
# acs start view-collector
Then wait until all of the services are running, and verify that activity is being logged.