cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
8300
Views
5
Helpful
13
Replies

ACS 5.5 does not show accounting log messages

danny4569
Beginner
Beginner

Hi.

I am working with ACS 5.5

For testing I have tried to get accounting messages from a 2960S switch configured with AAA new model for Authentication Authorization and Accounting using TACACS+.

Any idea why  I don't see any reports regarding accounting on the ASC?

On the switch all accounting messages are being showed if "debug aaa acounting" is configured.

Danny.


13 Replies 13

Jatin Katyal
Cisco Employee
Cisco Employee

Where are you looking for tacacs accouting logs on ACS 5.5?

Have you look inside the below listed path:

Select Monitoring and Reports, launch Monitoring and Report Viewer, then select Monitoring and Reports > Reports > Catalog.

TACACS Accounting : Provides user or command accounting information for TACACS+ authentications for a selected time period.

~BR
Jatin Katyal

**Do rate helpful posts**

~Jatin

Same here.

Config seems fine but the reports coming out blank.

Are there any configuration that I should look for at the ACS?

Best regards,

Felix

Best regards, Felix

Looks like another issue with ACS 5.5.

Are you running Evaluation (60 GB HDD) ACS 5.5. on vmware?

~BR
Jatin Katyal

**Do rate helpful posts**

~Jatin

Yes. I'm running ACS 5.5 the 90 day Evaluation on VMware...

Best regards,
Felix

Best regards, Felix

Scott Fella
Hall of Fame Guru Hall of Fame Guru
Hall of Fame Guru

I have the same issue. Tacacs logs was working fine on 5.4 and after upgrading to 5.5, nothing new showed up, but all the past authentication did.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***

adeboye.adeoso
Beginner
Beginner