04-19-2018 10:12 AM
I am reading through ACS to ISE migration guide 2.4:
And see this "This guide describes the process for migrating data from a Cisco Secure Access Control Server (ACS) , Release 5.5 or 5.6 to Cisco Identity Services Engine (ISE)" (and actually this wording is used everywhere in the guide). Previously, in the 2.3 guide we had "...Release 4.2 and 5.5 or later…".
Does that mean that we do not support any ACS versions other than 5.5, 5.6 with ISE 2.4 or that text is misleading and i should assume that it is "5.5 or later"?
Solved! Go to Solution.
04-19-2018 03:25 PM
You are correct, this appears to be wrong.
Forwarded to our Docs team for corrections and we'll get the document reposted.
Thank you for pointing this out to us!
04-19-2018 03:25 PM
You are correct, this appears to be wrong.
Forwarded to our Docs team for corrections and we'll get the document reposted.
Thank you for pointing this out to us!
04-19-2018 03:34 PM
Good to know - thanks for confirming!
08-08-2018 07:53 AM
Hi, Where do I find the ACS to ISE Migration 2.4 download? I can't find it on the Cisco support. Suggestion?
Thanks,
Vincent
08-08-2018 04:35 PM
Vincent, you can find it on the ise 2.4 download page, fourth one down.
https://software.cisco.com/download/home/283801620/type/283802505/release/2.4.0
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide