Network Access Control

My ISE two node deployment is currently version 2.1.0 Patch 3, I need to upgrade to version 2.2.0 patch 10 my primary question is can I go directly  to patch 10 after upgrading to version 2.2 and secondly ISE upgrades never go smoothly for me so inpu...

Hi, I wanted to replace the existing 3315 hardware to 3415 or higher hardware.The existing 3315 device is configured in standalone mode and I got 2 new 3415 and am planning to deploy in distributed mode.What will be the best approach to migrate from ...

Hi, as part of the guest registration process is there any way to check if a given email already exists in the internal dB? Would using a custom field to capture the email be a possible workaround? I'd appreciate if you can share any options or creat...

Hi All,   I have turn on the Radius Probe, DHCP Probe on the SSID, 802.1x MSCHAPv2, but ISE profile the endpoint of window as Intel, thus my policy has reject the endpoint. (randomly Happen)   as I know 802.1x unlike MAB, we cannot do until the User-...

Hi All,I am trying to integrate Sonus device with ISE. I have created profile in ISE with following attributes.Access Type = ACCESS_ACCEPTVendorSpecific = Vendor ID=2879Sonus suggested that RADIUS Access-Accept packet should return the following:RADI...

Hi  if i need policy set on Cisco ISE up 1000 policy how i do this ? because maxmum policy set version 2.4 up to 200 policy set. i have ise box 2 box, SNS 3595 and primary and standby NAD up to 8000+ and identity upto 1000+ users.

Hi team,   I have an question on the ISE license and need advise on that: if our customer wants to use the Posture Compliance feature on their PCs, do we need both the AnyConnect component + Apex license or only need the Apex license?   I think the a...

Hi team experts   Customer want to add a few custom field into self-registration form in guest portal .  for example ,  Region ID which also needs input-checking requirement ( for example only 3 letters is allowed  ) .   ISE may support to add custom...

Hi Guys   Is there a way to export the contents of all SGACLs in a system?  I know we ran export the matrix which includes the name of the SGACLs, just now looking to export the SGACL itself.   Ta Peter  

Hello, a general question please regarding BYOD onboarding; when users first connect to the initial unsecure onboarding SSID, their BYOD devices will not trust the ISE certificate due it having been issued by our local CA. Understandable Therefore is...

Is it possible to give a user access only to the alarm settings?

A customer wants to know if we can configure a WLAN environments with different sessions timeout per user. A WLAN environment where some users could enter with restricted time, such as Public WLAN where some users are registered with some session tim...