11-28-2017 09:49 PM
11-28-2017 10:42 PM
Hi,
ACS does not integrate with DNAC. ISE is the next generation ACS that you can use to integrate with DNAC.
Please see ACS vs ISE differences that speaks about all of differences between ACS and ISE.
https://communities.cisco.com/docs/DOC-63901
also look at http://cs.co/ise-community for further information on ISE.
-Krishnan
11-28-2017 10:42 PM
Hi,
ACS does not integrate with DNAC. ISE is the next generation ACS that you can use to integrate with DNAC.
Please see ACS vs ISE differences that speaks about all of differences between ACS and ISE.
https://communities.cisco.com/docs/DOC-63901
also look at http://cs.co/ise-community for further information on ISE.
-Krishnan
11-29-2017 04:09 AM
To build upon Krishnan's response, the minimum version of ISE that can be used with DNA Center is v 2.3. This integration is done through pxGrid. Once the two products are integrated, you can utilize the Device Administration (TACACS+) functionality in ISE as long as you have the required license.
11-29-2017 04:56 AM
ACS is going away
https://www.cisco.com/c/en/us/products/security/secure-access-control-system/eos-eol-notice-listing.html
11-29-2017 05:16 AM
Thanks a lot.
Would you know how is the Authorization defined at DNAC and ISE.I see avpair,but when i define role it gives error.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide