cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2360
Views
1
Helpful
4
Replies

ACS and ECC ciphers

berossig
Cisco Employee
Cisco Employee

Hi,

does anyone has a configuration example in order to use ECC ciphers with ACS 5.8. I noticed patch 4 support ECC for AAA flows, but i am looking for a guide and/or example in order to use it for EAP-TLS authentication.

thanks in advance!

Best Regards,

Benjamin Rossignol

1 Accepted Solution

Accepted Solutions

Hi Chris,

ECC certificates use ECDSA algorithm and not RSA as you might know.

Here is the comparison of key length between RSA and equivalent ECDSA

https://www.namecheap.com/support/knowledgebase/article.aspx/9503/38/what-is-an-ecc-elliptic-curve-cryptography-certificate

Here are few things you need to know when you are creating certificates for ACS

http://www.cisco.com/c/en/us/td/docs/net_mgmt/cisco_secure_access_control_system/5-8/release/notes/acs_58_rn.html#pgfId-454084

Here are instructions how to create a CSR using MS CA.

https://www.digicert.com/ecc-csr-creation-ssl-installation-microsoft.htm

and for apache

https://www.digicert.com/ecc-csr-creation-ssl-installation-apache.htm

Additional information on ECC

https://www.digicert.com/ecc.htm

Hope it helps.

Thanks

Krishnan

View solution in original post

4 Replies 4

kthiruve
Cisco Employee
Cisco Employee

Hi Benjamin,

This is to support certificates that supports ECC. This can work with EAP-FAST, PEAP-TLS and EAP-TLS client authentication.

Yes, you need the root/sub-ordinate CA to be in the trusted store for the user certificate to be validated like other certificate methods.

Thanks

Krishnan

Krishnan

Please elaborate how to prepare the ACS please. I am the person who ask Ben the original question for.

If this was RSA - I would place the RSA ca certificate up in the "User and Identity Stores" location and then create a CSR in the System Administration > Local Server Certificate > Local Certificates location, sign and complete the request in the Outstanding  Signing Requests.

Now I am using ECC - I would place the ECC ca certificate at the User and Identity Stores location and then generate a CSR but I noticed that the key length (512, 1024, 2048, 4096) and hash digest (SHA1, SHA256) don't match attributes of ECC.

Am I missing something?

Thank-you,

Chris

Hi Chris,

ECC certificates use ECDSA algorithm and not RSA as you might know.

Here is the comparison of key length between RSA and equivalent ECDSA

https://www.namecheap.com/support/knowledgebase/article.aspx/9503/38/what-is-an-ecc-elliptic-curve-cryptography-certificate

Here are few things you need to know when you are creating certificates for ACS

http://www.cisco.com/c/en/us/td/docs/net_mgmt/cisco_secure_access_control_system/5-8/release/notes/acs_58_rn.html#pgfId-454084

Here are instructions how to create a CSR using MS CA.

https://www.digicert.com/ecc-csr-creation-ssl-installation-microsoft.htm

and for apache

https://www.digicert.com/ecc-csr-creation-ssl-installation-apache.htm

Additional information on ECC

https://www.digicert.com/ecc.htm

Hope it helps.

Thanks

Krishnan

Thanks for this info...Chris

Sent from my iPad