06-05-2007 01:12 PM - edited 03-10-2019 03:11 PM
We are running acs se 4.01 and whenever i turn on the remote logging to our agent, the ACS itself becomes unusable until I turn logging off again. Any ideas?
06-05-2007 03:08 PM
Hi
If you mean, that as soon as you enable remote logging, authentication starts failing, then there are some issues with remote logging.
Also consider upgrading to latest ACS version, rather then being on 4.0(1)
CSCeg40355 : Authentication failures when remote logging fails
I am pretty sure its resolved in 4.1.1
http://tools.cisco.com/Support/BugToolKit/action.do?hdnAction=searchBugs
Be sure to use same remote agent version, as your ACS server software version.
Regards,
Prem
06-07-2007 04:53 AM
Correct, 4.1.1 build23 patch 4
06-07-2007 05:06 AM
Hi,
Make sure that Remote Agent is also for 4.1.1.23 and patched with patch 4. If you are not sure about that un-install it and install 4.1.1.23 RA and patch it with Patch 4.
Make sure that Critical logging is set to Local CSV, from,
System Configuration > Logging > Critical Loggers Configuration
You can also try upgrading to version 4.1.3 that is available.
Regards,
Prem
06-07-2007 11:02 PM
If you dont have any luck with remote logging try extraxi csvsync.
Csvsync can download CSVs on a scheduled bulk pull. Works with any number of ACSs, any version, any platform (Windows or SE)
Supports http & https, doesnt mandate a server OS and there's no agents etc.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide