ā06-29-2015 02:40 AM - edited ā03-10-2019 10:51 PM
I'm trying to get Juniper devices work with Cisco ACS 5.5 through ssh.
I have followed the steps in the below link but it didnt work:
http://kb.juniper.net/InfoCenter/index?page=content&id=KB23458
Is there any document that shows how to make juniper devices work with Cisco ACS TACAS+ server.
Solved! Go to Solution.
ā06-29-2015 03:18 AM
hi,
Pls provide snapshot of the ff. command from the juniper.
get admin auth
get admin user login
ā06-30-2015 05:11 PM
Hi,
Have a look at the following doc:
http://kb.juniper.net/InfoCenter/index?page=content&id=KB17269
Thanks
John
ā06-29-2015 03:18 AM
hi,
Pls provide snapshot of the ff. command from the juniper.
get admin auth
get admin user login
ā06-30-2015 05:11 PM
Hi,
Have a look at the following doc:
http://kb.juniper.net/InfoCenter/index?page=content&id=KB17269
Thanks
John
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide