cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Announcements
Choose one of the topics below to view our ISE Resources to help you on your journey with ISE

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

121
Views
0
Helpful
2
Replies
Highlighted
Beginner

ACS TACAS+ with Juniper Devices

I'm trying to get Juniper devices work with Cisco ACS 5.5 through ssh.

I have followed the steps in the below link but it didnt work:

http://kb.juniper.net/InfoCenter/index?page=content&id=KB23458

Is there any document that shows how to make juniper devices work with Cisco ACS TACAS+ server.

 

2 ACCEPTED SOLUTIONS

Accepted Solutions
Highlighted
Beginner

hi,

Pls provide snapshot of the ff. command from the juniper.

get admin auth
get admin user login 

View solution in original post

Highlighted
Collaborator

Hi,

 

Have a look at the following doc:

http://kb.juniper.net/InfoCenter/index?page=content&id=KB17269

 

Thanks

John

**Please rate posts you find helpful**

View solution in original post

2 REPLIES 2
Highlighted
Beginner

hi,

Pls provide snapshot of the ff. command from the juniper.

get admin auth
get admin user login 

View solution in original post

Highlighted
Collaborator

Hi,

 

Have a look at the following doc:

http://kb.juniper.net/InfoCenter/index?page=content&id=KB17269

 

Thanks

John

**Please rate posts you find helpful**

View solution in original post