AnyConnect VPN login failures

[BrianChernish]

We use an ISE-PIC server as an identity source for our FP1120. I setup RA VPN access with AnyConnect Client and had it working. I was trying to configure reporting and I changed something, now I can’t connect. The AnyConnect Client simply shows “Login error”.

The VPN “troubleshooting page shows “aaa-server group ISE32 as failed” twice, once for each of my Domain Controllers.

Then it shows “aaa-server group ISE32 as ACTIVE” again, twice, once for each of my Domain Controllers.

Screen shot:

Any assistance would be appreciated.

Thank you,

Brian

[balaji.bandi · Accepted solution]

hope that logs you show from ISE ?

did you check the ISE and LDAP connection testing ?

[BrianChernish]

ISE was not communicating with the FirePower. Once I resolved the network issue it began to work. Thank you.

Brian