ISE 2.3p1(post 10-18-2017 update) VM, running on HyperV 2012R2
I know the wireless wizard is beta.
But it doesn't matter so far what wireless wizard I try to run, they all get to the "Wireless LAN Controller" screen...and just sits there spinning at 'loading..." on what I am assuming is step 1?
I tried this before the p1 update, I tried it on the original p1 update, and on the corrected p1 update. All the same result.
Solved! Go to Solution.
I’m not sure what documentation you are referring to I open this bug because the tool does not work with wireless code version 8.5 can you please test it with 8.3 And also provide guidance to the sales channel on your customers requirements and using this tool and give it to the p.m. that I mentioned above
This is a known issue, its also still in beta, I provided the defect, the tool is only meant to get a system up and running quickly to showcase guest byod and secure access in about 10 min. Its not meant for deploying into production. So you can demonstrate this on 8.3 in a proof of concept and then move system to 8.5.
Please see the admin guide and corresponding information in the following link
Please again escalate your issue of it not working at all in your environment. We have this working in our demo environment as well. Dcloud.cisco.com with about 70 uses a week.