ASA 5520 using Client VPN and RADIUS authentication

[whiteford]

Hi, I have a Cisco Concentrator. Users using their Cisco VPN client authenticate using RADIUS (Active Directory) which just a windows IAS server.

I eventually want to move the Client VPN's over to the ASA's but I can't find where to add the authentication servers in the ASDM?

[acomiskey]

Config -> Device Management -> Users/AAA -> AAA Server Groups. Create a server group, then add a server to that group.

[whiteford]

Thanks, Is that for users logging onto the ASA, or as a Cisco VPN client connection?

Also on the Concentrator there is a great monitoring tool called Monitoring | Filterable Event Log, it really helps me see why a user can't logon or a VPN Lan to Lan can connect, does the ASA have a simialr tool?

[acomiskey]

It can be used for either. To use it for vpn clients, you must assign the server group to the ipsec connection profile.

Try Monitoring -> Logging -> View

[whiteford]

Thanks again, don't suppose there is a migration document or any document to help me configure the client VPN's, so use to the Concentrator.