04-27-2016 02:34 PM - edited 03-10-2019 11:43 PM
Hi
I need help with configuration for authenticate with Windows Radius Server for use AAA configuration on the network device.
The Radius Server is Windows Server 2012.
The Switch are, 2960x, 3850, 3650
Routers are 2900, 3900, 4400
WLC 5760
Thanks for help
Regards
04-28-2016 09:02 AM
Hi Francisco,
For configuring windows radius server please see if they below link helps:
http://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-generation-firewalls/117641-config-asa-00.html
Please see section: Windows 2008 Server with NPS Configuration (hope it helps with win 2012)
For switches and routers to act as radius client , configuration is real simple and can be referenced from any user guide. I am pasting the link for your reference as well:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/security/configuration/guide/fsecur_c/scfrad.html
Let me know if you have any questions.
Regards,
Kanwal
Note: Please mark answers if they are helpful.
05-02-2016 01:49 PM
Hi
I try but not work
Configuration on switch
aaa new-model
!
!
aaa group server radius SWITCH
server 10.10.2.3 auth-port 1645 acct-port 1646
!
aaa authentication login default group radius local enable
aaa authentication enable default group radius
aaa authorization console
aaa authorization exec default group radius local
aaa authorization network default group radius local
aaa accounting network default start-stop group radius
!
aaa session-id common
!
radius-server host 10.10.2.3 auth-port 1645 acct-port 1646 key cisco123
05-02-2016 04:01 PM
Hi Francisco,
Can you please replace 'default group radius' with "default group SWITCH" and try again?
Regards,
Kanwal
Note: Please mark answers if they are helpful.
05-05-2016 11:33 AM
Hi Fnu
I use only this commands
aaa new-model
!
!
aaa group server radius SWITCH
server 10.10.2.3 auth-port 1645 acct-port 1646
!
aaa authentication login default group SWITCH local enable
aaa authentication enable default group SWITCH
But when putting enable password does not work, I configure enable password and I use my password and does not work.
Regards
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide