03-19-2024 02:27 PM
i'm installing Cisco ISE 3.3 in Azure. after node is installed and I change the IP to static, I can not ssh to the node with public key or via the Azure Serial console and it seems ISE service won't start either. i've tried multiple times with new install and got the same result. anyone running into this same issue with Azure ISE 3.3?
03-19-2024 02:42 PM
what was the before IP address - is the static IP address same range ?
3 days back tested in My lab using exsi working for me with below guide :
03-19-2024 02:46 PM
yes, all i did was change from dynamic (10.200.101.5) to static (10.200.101.25) and then start the azure vm. after that it stopped working. i can ping it 10.200.101.25 but can not access serial console
Failed to log in 0 time(s)
Failed to connect to server
Exit
Connection to 10.200.101.25 closed.
03-20-2024 08:57 AM
Where did you apply that change?
03-20-2024 09:03 AM
In Azure vm's network setting, I change from dynamic to static
03-20-2024 05:10 AM
@balaji.bandi: ESXi environment is NOT the same as Azure or AWS environment. They are not the same.
03-20-2024 09:02 AM
i open TAC case and it seems i'm hitting this bug
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide