Network Access Control

Good Day, Currently running a wireless NAC deployment on a single SSID with ISE 1.2.1. The BYOD enrollment works perfectly for most supported devices with the exclusion of the S3 on Android 4.3. I have tested Android 4.3 4.4 and 5 on other devices an...

Hello ,         after upgrading ISE 1.2 to 1.2.1 , I can't see posture status (pending) although it is working properly. I tried to install patch 1 but the same result.before upgrading , posture status was Pending when posture status still not reach ...

Hi Guys,ACS 5.5 is installed on SNS-3415 appliance.Integration with Active Directory 2012 has been successfully completed.The problem which I'm facing that i can't see all the groups of AD under ACS, i see only few of them.Also if i created new Group...

Hi Guys i have the following issue with BYOD registration. Latest Java version installed on a Macbook (IOS 10.9.5) then logged on to the client wirelless BYOD Network.  Then I get a redirect to the ISE server to register my device after that  the CIS...

Hi guys,I am doing it in a lab so please guide me to understand this concept.I have Cisco 3560 switch. What i want to achieve isAny device that connects to port 1 of switch, switch should be able to communicate with 802.1x server, tell it the mac add...

We are running Cisco ACS 5.4 for WLAN authentication.  Can we install multiple ACS server certificates and use them for EAP authentication?E.g.Cert#1 issued by CA#1, and will be used for PEAP authenticationCert#2 issued by CA#2, and will be used for ...

Hello, I create a Open SSID in WLC named Visitante and Configured ISE to do CWA.Rule is:AuthZ_CWA =  If Device:Wireless Lan Controller Equal WLC then WLC_CWA  I create a guest account in Sponsor Portal and above rule in ISE is: AuthZ_Guest = If Guest...

Hi all,We have a campus wifi network using two Cisco 5508s (in an HA configuration) on 7.6 code and 2700-series APs.  For our corporate users we have an existing SSID doing 802.1x with vlan assignment to Microsoft NPS running on Windows 2012R2.  All ...

Hi Pros,               I am a newbie in the ACS 4.2 and EAP-TLS implementation, with that being said. I face an issue during a EAP-TLS implementation. My search shows that this kind of error message is already certificate issue;However, I have delete...

Hi AllI did upgrades from 1.2.1.198 to 1.3. With one box (SNS-3495-K9) out of four I have a problem.I've tried it many times, I even made it to a standalone and did an application reset-config ise to initialize the box prior updating, but it always f...

Hey everyone, I was wondering if someone could help me. I am trying to implement 801.x port security in my network. In our switch ports we have an IP AVAYA phone connected and a workstation connected to the IP phone. I enable dot1x authentication on ...

I would like to inquire cisco ASA do support 2FA( second factor authentication-example: One time password) or not?. Just to inform, I want configure my cisco ASA to authenticate vpn user using Active directory password and One time password as well. ...