Network Access Control

Dear All,Can anyone help me in the following scenario:Solaris users need to authenticate with Cisco ACS 5.0 as a radius server. How to configure ACS 5.0 for this? Which radius attributes do I need to configure? Do I also need to add vendor Id for sol...

Hi all,         There is the deal, I have a Cisco ACS  for windows server well configured. I have  3 network access profile defy: one for wired netwrok(802.1x), one for wireless using 1100 series APs, and one for VPN access. The first two work fine, ...

Hi all,is it possible to use the ACS 5.2 as local CA and perform machine-authentication via PEAP/EAP-TLS with the certificate generated on the ACS?This would be very helpful because we do not have a general CA in our environment.regards,Dirk

hi,i try to integrate my ADE 1010 appliances running on ACS express v5.0.1.1 to my DC running on window 2008 server enterprise edition SP2.as i fill in the info at domain configuration and test the connection, it's succeed. but once try to save and j...

Hello,I have recently installed an SSL certificate provided by my customer (from Commodo) but when I logon to ACS my browser warns that the certificate is not verified upto a trusted CA. This cert is going to be used for EAP-PEAP, EAP-TLSI think this...

I have been trying to get remote ipsec client get authenticated via ACS, cannot figure out what is causing the issue. Below is the configuration and debugs.Is there anything specific that needs to be configured on the ACS?? BTW ACS version is 3.3any ...

Hi there,I am having problems getting this web-auth working and am hoping you guys can assist with a solution. It works for ssh/telnet, but not for proxy web auth.This is the equipment:Cisco 3750G with IOS 12.2(53)SE1CiscoSecure ACS Appliance Release...

We have recently started testing Cisco ACS 5.2, but we are hitting an issue when we try to register a Wireless LAN Controller. Even when the device is registered on the ACS under "Network Devices and AAA Clients" we are getting the following error me...

I am searching the solution  "realm" concept of Linus Radius  on Cisco ACS.The customer hope their authentications such as account aaa@bbb.ccc send to a specific Radius server while other accounts aaa(such as no realm) to their window database(unknow...

HelloI configured aaa on FWSM, it works great expect the accounting for telnet and ssh. This is my configurationaaa-server tacacs+ protocol tacacs+aaa-server tacacs+ (inside) host xxxxxxx key xxxxxxxxxxaaa-server tacacs+ (inside) host xxxxxxxx key xx...

I have  a problem when try to delete a network device from acs 4.2. The ACS show me the following message." falied to edit the LOBBY-LIMA-COMISARIA_CIUDAD_....  reason: the host no longer exits"could you help me ..Marco

We recently deployed this version of ACS. Some of our devices don't allow ssh and are currently configured for telnet only. I have a service selection rule say ServiceSelection1 so that if protocol is tacacs to use TacacsAccessPolicy service. For the...

Dear All,I am using ACS 5.0 version. Devices cannot able to access ACS If I am creating /32 IP device(AAA Client) address in the ACS.When I define subnet for the device e.g. /24 then all devices in the same subnet will start working.Why single IP add...