Network Access Control

RDP to Windows 10  machine is not working when Cisco NAM is used instead native Windows supplicant. The case is below: 1) PC is turned on and passed machine authentication 2) RDP is initiated to PC and user authentication passed. But RDP is not estab...

Hello,Could someone please point me toward the OT Insights documentation as it applies to the attached PDF and image below? Thank you,Matthew

Hi gents (and gals) in our community,Do we need Posturing for Implementing Dot1x and MAB, or is it a requirement for implementing wired ise? I'm initially planning to follow the recommended phase from Monitoring, Low-Impact, to Closed mode. Currently...

Hi,I need know a way how to read the "802.1x (dot1x) Auth Session Terminate Cause" from Catalyst 2960 Plus Series SI.Via SNMPv2 with IEEE8021-PAE-MIB which contains it I can read only some items, of course not the AuthSessionTerminateCause.dot1xAuthS...

When testing, we found there would be one situation as following. Our Setup;   Posture Policy is configured 'Check against latest AV definition file version if available.' ISE is updating Posture database every 2hrs. EPO server （On Premises) is updat...

We have to renew System Certificates in a distributed environment that will expire in a few days using the same external CA. We are running 2.2 patch 7. We changed the OU (CN,OU,C,O,L,ST) field so that the subject is different than the current one an...

I have successfully created a python script that does the following:Asks user if device is printer or workstation, and based on answer execute separate functions. From here the user is then asked several questions:Is the endpoint new (True/False)Ente...

Hi  ISE upgrade is failing after 40 percent for an ISE node. All the prerequisite checks were done before upgrade but the upgrade failed. Thanks, Aravind.

I have an ACS ver 5.4.0.46.7 running on an applicance, ACS-1121-K9. After rebooting a Win2008-controller it stopped working and someone in my Department rebooted the ACS. It looks like the authentications are working now, but I can't Access the web g...

Hi, I have a Cisco 3850 switch doing dot1x authentication on ports. In the posture unknown state I am pushing a redirect acl and a DACL from the ISE once the user moves to posture unknown state. I have noticed that in the posture unknown state the DA...

Hi to all,I am trying to overrun some "cumbersome" limitations of ISE purge endpoints function when profiler service is not active. I am trying to leverage  on ISE restful API.Essentially I want to get the list of endpoints with "ElapsedDays" attribu...

Hi there I have a new C2960X that we are replacing a couple old ones with.I can not get RADIUS working  .  yes the switch can ping the radius server .. i took out the key but it is there HELP I have it programmed like thisaaa new-model!!aaa group ser...

HelloWith ISE monitor mode and low impact mode, you can have a interface ACL on switch. When you switch to trustsec, how do you implement something like that. Is there a way to have a initial trustsec group for example for low impact mode to put the ...

I want to set manual SMS service for sponsor portal. Do you have procedure for the same. I have added SMS GW under Administration > Settings > SMS Gateway. But now don't able to figure out how to integrate it with my sponsor portal to send SMS.