Network Access Control

All,If a customer has ACS 5.8 running on a VM and they currently have SmartNet, do they need to still purchase the ISE VM Migration license, and then have the SmartNet switch to support an ISE appliance instead of an ACS or can they through their Sma...

This is a customer scenario which is as underWe would like to be able to simplify the current on boarding processes onto MobileIron  and Cisco ISE if possible without compromising on our current security.The process for corporate devices would be as ...

Hi,Our customer would like to map the guest user identity to their Internet activity. From older threads I understand that this is possible using the "Guest Activity Report", now replaced by the "Guest Master Report".As I have tried to set it up with...

Hello,I cannot see these switches on the ISE compatibility chart.Can someone let me know if they are fully supported and how I can find this information on my own for next time?Thank you!Switches:WS-C3750-48P WS-C3750-48PS-S

We're having issues with Cisco ISE not showing any logs in web GUI. The logs show up in 'Show logging' CLI, but it doesnt seem to present itself to the GUI. We have a 2 node cluster, with roles split.The issue started while on 2.1. The admin node wen...

Hey guys, I have two ISE nodes in the DMZ hosting the guest portal for 'One Click Approval'. The dilemma I have is the 'Approve' (or 'Deny') URL as shown below. By default, this is the IP address of the ISE node which the guest used to create an acco...

Do we have a roadmap on when we will stop supporting 3495 with new versions of code?  Are these appliance still supported on 2.4?

Hi team,I got the request to return to the WLC the radius:username attribute in the authorization profile when doing CWA, because all subsequent connections currently end up with the MAC address instead of the guest username in the WLC session report...

ISE 2.1 patch 6Meraki 25.8When we enable 'Layer 2 LAN isolation' feature in Meraki we do not get Redirect URL on clientDisabling this feature everything works fine.Does this feature cause any issues with redirection? Or do we need some other configur...

Hi,I am trying add custom attributes for Juniper Netscreen TACACS+ authentication to a v5.2 ACS. The advice is to add it to the group as follows:ervice = netscreen { vsys = root privilege = read-write } I know how to add this to a version v4.x ACSHow...

Hi,How can we configure Radius attribute Class (25) as a condition in AuthZ policy? This is a Anyconnect scenario,where user authentication from ASA (Radius Access-Request) is sent to ISE and ISE send it to an external Radius server (Proxy Service). ...