03-03-2019 08:54 PM
Hello everyone
I need to reload two ise nodes due to a bug that caused licensing consumption page to show zero. ise1 primary(pan/mnt) and ise2 Secondary(pan/mnt). I have 4 psn nodes and they should stay up. I need to ensure no downtime. I know I have to do both config and operational backup first.
option1
send reload command to secondary node first and wait for it to come back up then reload primary
option2
promote secondary to primary then reload ise1 and when ise1 comes back up switch ise2 back to secondary
please let me know if those options are valid and which is best or if there are other options. Thank you!
Solved! Go to Solution.
03-04-2019 12:12 AM
03-03-2019 09:50 PM
Hi,
Dont see much difference between Option 1 or 2.. with Option 2 you can get back to same state(ISE1- Primary and ISE2- Secondary)..
Yes, Make sure you perform a configuration and operational backup and use application stop ise & Halt CLI to Shutdown ISE instances and reduce any database corruption..
Regards
Mahesh
03-04-2019 05:29 PM
"Yes, Make sure you perform a configuration and operational backup and use application stop ise & Halt CLI to Shutdown ISE instances and reduce any database corruption"
thank you. Are you saying its better to shut it down rather than sending the command "reload"?
03-04-2019 12:12 AM
03-04-2019 05:32 PM
thank you Damien.
12-08-2020 03:43 AM
This is exactly what I was looking for.
Thanks!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide