06-09-2020 06:23 AM
Hello All
In the Cisco documentation, Topic: Recommendations for MACsec Encryption
I came to know that recommended BFD timer values are 750 milliseconds for 10Gbps ports and 1.25 seconds for any port with speed above 10Gbps.
my query is :
- Why such high values are recommended, doesn't these impact the convergence time ?
- If I use lower values , for example - 100ms multiplier 3 - then what could be the difference in behavior.
Solved! Go to Solution.
06-09-2020 07:35 AM
This sounds like a switching question and not an ISE / NAC questions but you didn't include a link to the Cisco documentation you are referring to. If so, you should move this question to Cisco Community > Technology and Support > Networking > Switching
06-09-2020 07:35 AM
This sounds like a switching question and not an ISE / NAC questions but you didn't include a link to the Cisco documentation you are referring to. If so, you should move this question to Cisco Community > Technology and Support > Networking > Switching
06-09-2020 07:53 AM
Thank you. I opened another one.
06-22-2021 07:38 AM
Hello hardeepkumar
Can you please share the link or the answer you got from the switching side.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide