BYOD with Cisco ISE and WLC

[Bhardwajp]

Hi ,

We are integrating Cisco ISE and WLC for BYOD.

Is we need to set same SSID's on both the device Cisco ISE and WLC.

[balaji.bandi]

Is we need to set same SSID's on both the device Cisco ISE and WLC.

SSID for the users to connect wireless, ISE is just identity and policymaker here.. not sure if we follow your question here.

[Marcelo Morais]

Hi @Bhardwajp 

 please take a look at: ISE Policies Based on SSID Configuration, search for Method 2: Called-Station-ID.

Hope this helps !!!

[thomas · Accepted solution]

ISE 3.0 has an Interactive Help wizard for configuring 802.1X Secure Wireless with an AireOS WLC. You can also just run the separate flow Configure 802.1X Wireless Authorization Rule it will show you how to match your SSID name in the ISE policy.