cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

631
Views
5
Helpful
3
Replies
Bhardwajp
Beginner

BYOD with Cisco ISE and WLC

Hi ,

 

We are integrating Cisco ISE and WLC for BYOD.

 

Is we need to set same SSID's on both the device Cisco ISE and WLC.

1 ACCEPTED SOLUTION

Accepted Solutions
thomas
Cisco Employee

ISE 3.0 has an Interactive Help wizard for configuring 802.1X Secure Wireless with an AireOS WLC. You can also just run the separate flow Configure 802.1X Wireless Authorization Rule it will show you how to match your SSID name in the ISE policy.

image.png

View solution in original post

3 REPLIES 3
balaji.bandi
VIP Expert

Is we need to set same SSID's on both the device Cisco ISE and WLC.

SSID for the users to connect wireless, ISE is just identity and policymaker here.. not sure if we follow your question here.

 

BB

***** Rate All Helpful Responses *****

How to Ask The Community for Help

Marcelo Morais
Advocate

Hi @Bhardwajp 

 please take a look at: ISE Policies Based on SSID Configuration, search for Method 2: Called-Station-ID.

 

Hope this helps !!!

thomas
Cisco Employee

ISE 3.0 has an Interactive Help wizard for configuring 802.1X Secure Wireless with an AireOS WLC. You can also just run the separate flow Configure 802.1X Wireless Authorization Rule it will show you how to match your SSID name in the ISE policy.

image.png

View solution in original post

Content for Community-Ad