Cannot install ISE Hotfix for ISE 2.6 Patch 7

[Martin Grimm]

Hi there,

i tried to install the Hotfix for ISE 2.6 Patch 7 with the following error message:

Getting bundle to local machine...
% File transfer error
campus-0-ise1/admin# application install CSCvv41074_2.6.0.156-Patch7-SPA.tar.gz FTP
Save the current ADE-OS running configuration? (yes/no) [yes] ? no

Getting bundle to local machine...
Unbundling Application Package...
% Invalid bundle contents

Same on all customer nodes. I followed the README.txt. Same Output for patch install.

Any suggestions?

Greetz

Martin

[marce1000]

 - Make sure the source distribution(/file) is not corrupted and or verify md5-checksum (e.g.)

  M.

[Martin Grimm · Accepted solution]

Hi Marc,

thanks for posting. MD5 is already double checked.

I will raise a TAC case this week and keep you updated.

Greetz

Martin

[marce1000]

 - Ok, you could if so desired try to execute an extra integrity check on the distribution file by unpacking it with winzip for instance.

 M.

[munish.dhiman1]

Hi Martin,

Any Luck? Facing same issue.

Regards,

MD

[Martin Grimm]

I opened a TAC case and keep you updated.

Greetz

Martin

[Marlin · Accepted solution]

Hi Martin,

You need to extract the files which are inside the "CSCvv41074_2.6.0.156-Patch7-SPA.tar.gz" file. You'll be able to find an apply and rollback file:

ise-apply-CSCvv41074_2.6.0.156_common_1-SPA.tar.gz

ise-rollback-CSCvv41074_2.6.0.156_common_1-SPA.tar.gz

The apply file is the one you should use if you want to install the hotpatch via the "application install" command. There should also be a README file with further instructions.

Hope this helps!

Greetings,

Marlin

[Martin Grimm]

Hi Marlin,

i have to go to primary school, to learn to read, again.

I didn't recognized the different file names stated in the README.

Thanks a lot for this hint, now it is working.

Greetz

Martin