04-10-2022 01:38 PM
Hi all
im using ISE for study installed in a VMware workstation But icant connect to internet
any idea ! i need to download anyconnect compliance
thanks
Solved! Go to Solution.
04-12-2022 06:59 PM
ty all guys
i works now after addeding asa firewall and configuration of nat
ty all for support
04-10-2022 08:47 PM
Hi @elheroual
that's not an ISE problem at all. This problem could apply to any VM in your lab that is not setup correctly.
Check your hypervisor network settings (are you bridging, or using NAT?) and then don't forget to configure a DNS server on the ISE CLI.
04-11-2022 05:25 AM - edited 04-11-2022 05:26 AM
Looks like the host do not have NAT Rule, or routing to internet.
contact network and security team for this.
from command level are you able to ping 8.8.8.8 ?
04-11-2022 08:35 AM
HI
no not able to ping 8.8.8.8
i tried to download the anyconnect compliance from cisco but idont have a service contract
some one can upload it for me pls
thanks
04-11-2022 08:50 AM
You need to contact local network team see ISE can reach to internet, in the path there may be FW which i think blocking.
04-12-2022 06:59 PM
ty all guys
i works now after addeding asa firewall and configuration of nat
ty all for support
04-12-2022 11:56 PM
glad all working as expected.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide