08-16-2016 09:43 AM - edited 03-11-2019 12:00 AM
Hi,
I have set up a Guest Portal CWA with WLC 5508 8.0.133.0 and ISE 2.1.0.
I have made all the rules in both Authenticatin and Authorization, and I also see the clients hitting the right rules. The Authorizaton rule redirects the client to a captive web portal within ISE like this: cisco-av-pair = url-redirect=https://ip:port/portal/gateway?sessionId=SessionIdValue&portal=d30c7eb0-41e0-11e6-a7c7-0050569e27a1&daysToExpiry=value&action=cwa
I have 3 different guests portals for each SSID and everything works fine.
The problem is that, when the wireless guest receives the redictect URL from ISE (URL to access the ISE Guest Portal), this URL is based on the ISE DNS name, not on its IP address. The FQDN of my ISE is iselab01.example.local and the certificate showing the guest portal domain is for example.local.
Now I have been asked to create a new guest portal but this time I have the certificate belongs to the example.org domain and need redirection to this new guest portal use this new domain.
I have tried to code, in the CWA Authorization profile, the equivalent URL redirect via the CISCO av-pair as follows :
cisco-av-pair = url-redirect=https://iselab01.example.org:8443/portal/gateway?sessionId=SessionIdValue&portal=d30c7eb0-41e0-11e6-a7c7-0050569e27a1&daysToExpiry=value&action=cwa
but, it does not work, since the sessionIdValue is not replaced by its real value when sent to the wireless client.
Is it possible to change the redirect URL from ISE somewhere just for some guest portal?
Best regards
Solved! Go to Solution.
08-16-2016 10:18 AM
Just use the automatic CWA setting in the authz profile, instead of entering the cisco-av-pair yourself, you will find that you can change the fqdn portion of the url, so the sessionid is kept intact.
08-16-2016 10:18 AM
08-16-2016 10:29 AM
Hi Jan,
Thank you very much for your help, I had found and was about to try if it worked well.
Thanks again for your quick response.
Best regards
11-11-2021 02:06 AM
salut c, au faite j'aimerais savoir comment vous avez fait pour configurer votre wlc et l'ise car je n'arrive toujours pas a commuquer mon wlc 9800 a l'ise
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide