cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

18511
Views
5
Helpful
4
Replies
Highlighted
Beginner

Changing Date/Time(zone) on ACS5.1

Would love to know where I can change the date/time(zone) within ACS v5.1.  Changing it in the BIOS doesn't have a zone option, just date/time.  ACS then displays something completely different upon boot.  Haven't been able to find any settings for this in the GUI, and the one link I did find in a discussion points to a doc that apparently I'd need special access for.

Attempting to join this to AD, so instructions on setting up the NTP server would also be helpful.

None of these options were available during the clean setup of 5.1.

Thanks much!

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Cisco Employee

Hi Wayne,

This can be done through the command line over a console/SSH connection.

1. To manually set the clock:
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.1/command/reference/cli_app_a.html#wp1036987

2. To configure an NTP server:
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.1/command/reference/cli_app_a.html#wp1013780

3. To configure the time zone:
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.1/command/reference/cli_app_a.html#wp1013028

Hope this helps,

Fede

--
If  this helps you and/or answers your question please mark the question as  "answered" and/or rate it, so other users can easily find it.

View solution in original post

4 REPLIES 4
Highlighted
Cisco Employee

Hi Wayne,

This can be done through the command line over a console/SSH connection.

1. To manually set the clock:
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.1/command/reference/cli_app_a.html#wp1036987

2. To configure an NTP server:
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.1/command/reference/cli_app_a.html#wp1013780

3. To configure the time zone:
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.1/command/reference/cli_app_a.html#wp1013028

Hope this helps,

Fede

--
If  this helps you and/or answers your question please mark the question as  "answered" and/or rate it, so other users can easily find it.

View solution in original post

Highlighted

Thank you, Fede - That was exactly what I needed.  =)

5 stars, and "answered".

Highlighted

Thank you Wayne, glad this helped.

Feel free to ping us back in the future in case further assistance would be needed with your ACS.

Regards,

Fede

--

If  this helps you and/or answers your question please mark the question as  "answered" and/or rate it, so other users can easily find it.

Highlighted

Hi fziliott,

      Thank you so much, can you please tell us what impact will happen while changing time zone in ACS 5.5 in live network.