07-28-2016 03:41 PM
Hello,
Has anyone successfully changed the hostname on an ISE 2.1.0.474 Standalone installation? We looked at doing this awhile back and was basically told it was extremely difficult to do. We are in need of changing it due to a certificate issue. Any help or advice would be appreciated.
Thanks!
Beth
Solved! Go to Solution.
07-29-2016 09:35 AM
I am not sure why TAC commented so. I've not had much problem with hostname changes for a standalone ISE. Please note that we would need to re-generate the internal CA certificate chain after the hostname change for the ISE internal CA to continue issuing certificates.
If you run into any problem, please let us know so we can track it down.
07-28-2016 04:19 PM
Did you try and have a problem? Make sure you backup first.
http://www.cisco.com/c/en/us/td/docs/security/ise/2-1/cli_ref_guide/b_ise_CLIReferenceGuide_21/b_ise_CLIReferenceGuide_21_chapter_011.html#ID-1364-00000428
Warning: I either dictated this to my device, or typed it with my thumbs. Erroneous words are a feature, not a typo.
07-28-2016 09:43 PM
If you are updating "hostname" only, what George provided is a good option. I've done it a couple of times.
If you are updating more than "hostname", then try "reset-config", which is added in ISE 2.0 to reset network and time settings.
Either way, I would also suggest to reload the ISE node once the changes are done.
07-29-2016 06:56 AM
Thank you both. The reason I ask is when we looked at doing this in the past, I contacted TAC and their response was “Unfortunately, changing the hostname on ISE is a Herculean task.”
I will definitely do a backup before attempting any changes.
07-29-2016 09:35 AM
I am not sure why TAC commented so. I've not had much problem with hostname changes for a standalone ISE. Please note that we would need to re-generate the internal CA certificate chain after the hostname change for the ISE internal CA to continue issuing certificates.
If you run into any problem, please let us know so we can track it down.
09-16-2018 02:14 PM - edited 09-16-2018 02:15 PM
Can this be achieved by entering hostname NEWHOSTNAME at global config mode on the ISE, I believe it works on ISE1.2.
Regards.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide