03-09-2012 08:28 AM - edited 03-10-2019 06:53 PM
I have several 2950 switches that I cannot get to work with TACACS. I'm using the same config for these that I am using for other cisco switches.
Cisco Internetwork Operating System Software
IOS (tm) C2950 Software (C2950-C3H2S-M), Version 12.0(5.3)WC(1), MAINTENANCE INTERIM SOFTWARE
System image file is "flash:c2950-c3h2s-mz.120-5.3.WC.1.bin"
username XXX privilege 15 password 7 XXXXXX
enable password XXXXXX
aaa new-model
!
aaa authentication login default group tacacs+ local
aaa authentication login conmethod enable group tacacs+
aaa authentication enable default group tacacs+ enable
aaa authorization exec default group tacacs+ if-authenticated
aaa accounting exec default start-stop group tacacs+
!
tacacs-server host XXX.XXX.XXX.XXX key 7 XXXXXXX
tacacs-server host XXX.XXX.XXX.XXX key 7 XXXXXXX
Any help would be greatly appreciated.
Thanks.
Solved! Go to Solution.
03-09-2012 11:14 AM
Hi,
How does your line vty configuration looks like?
Have you tried the test aaa-server command? If you have, what are you getting?
03-09-2012 11:14 AM
Hi,
How does your line vty configuration looks like?
Have you tried the test aaa-server command? If you have, what are you getting?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide