cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.

1315
Views
0
Helpful
1
Replies
nathant
Beginner

Cisco ISE 2.4 BYOD integration with Meraki

I am interested in configuring Cisco ISE 2.4 BYOD and integrating it with my Meraki MX84, MS320 and MS225 switches and my MR42 Access Point (AP).

 

I would ideally like to set up a Dual SSID scenario with an isolated "Guest" network (going through the ISE 2.4 on-boarding process) and then automatically connect to the "Authorised" network when permitted by the ISE policies.

 

I am hoping to use the DHCP and wireless features on the Meraki appliances and enable a Guest redirect to ISE 2.4 .

 

I have read there is some limitations with integrating ISE to Meraki, and I was hoping to get some more information on if my scenario would be technically possible?

1 ACCEPTED SOLUTION

Accepted Solutions
Jason Kunst
Cisco Employee

1 REPLY 1
Jason Kunst
Cisco Employee

Did you follow the meraki ise how to guide on our design integration guide site?


https://community.cisco.com/t5/security-documents/ise-design-amp-integration-guides/ta-p/3621164
Create
Recognize Your Peers
Content for Community-Ad

ISE Webinars


Miss a previous ISE webinar?
Never miss one again!

CiscoISE on YouTube