12-26-2019 06:19 AM
I have upgraded my distributed deployment from ISE 2.2 patch 14 to ISE 2.6 patch 3. I am getting the alarm for the Replication failed but on the deployment page, i can't see any issue on the node status. All nodes look good and in sync properly but still i am getting this Replication failed alarm continuously.
Moreover, i can see the replication failed in thee replication logs as well.
It looks like a replication issue but why i am not seeing the node status with the sync error, all nodes look good.
Are there any suggestion on this issue?
I know once i hit the manual sync all will be good but i need to know the reason behind triggering this alarm.
Solved! Go to Solution.
01-02-2020 06:19 AM - edited 01-02-2020 06:21 AM
Please open a tac case. This is not for troubleshooting or urgent issues
Similar thread here! https://community.cisco.com/t5/policy-and-access/ise-sends-replication-alarms-but-all-nodes-seem-to-be-synced/m-p/4005534#M74247
01-02-2020 06:19 AM - edited 01-02-2020 06:21 AM
Please open a tac case. This is not for troubleshooting or urgent issues
Similar thread here! https://community.cisco.com/t5/policy-and-access/ise-sends-replication-alarms-but-all-nodes-seem-to-be-synced/m-p/4005534#M74247
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide