10-20-2014 07:24 AM - edited 03-10-2019 10:07 PM
Hi Guys
i have the following issue with BYOD registration.
Latest Java version installed on a Macbook (IOS 10.9.5) then logged on to the client wirelless BYOD Network.
Then I get a redirect to the ISE server to register my device after that the CISCO Network Assistant is downloaded and started. This installation failed with (MacOSxpwizard 1.0.0.21)
I know there is a newer version (MacOSxpwizard 1.0.0.27) but this version won't even start.
However, when I manually start the CISCO Network Assistant I get the following:
EUCs-MacBook-Air:~ euc$ cd /var/folders/_0/nfr888s97czbcdtc69yj44hc0000gn/T/SPW.app/Contents/MacOS
EUCs-MacBook-Air:MacOS euc$ ls
SPW
EUCs-MacBook-Air:MacOS euc$ sudo ./SPW
Password:
2014-10-20 13:47:12.229 SPW[1366:507] grep returned:
An asterisk (*) denotes that a network service is disabled.
(1) Bluetooth DUN
(Hardware Port: Bluetooth DUN, Device: Bluetooth-Modem)
(2) Wi-Fi
(Hardware Port: Wi-Fi, Device: en0)
(3) Bluetooth PAN
(Hardware Port: Bluetooth PAN, Device: en2)
(4) Thunderbolt Bridge
(Hardware Port: Thunderbolt Bridge, Device: bridge0)
2014-10-20 13:47:12.268 SPW[1366:507] grep returned:
Ethernet is not a recognized network service.
** Error: The parameters were not valid.
-----BEGIN CERTIFICATE REQUEST-----
MIIC2DCCAcACAQAwFjEUMBIGA1UEAwwLcnNjaGFhcmVtYW4wggEiMA0GCSqGSIb3
DQEBAQUAA4IBDwAwggEKAoIBAQD1kT0GBWb/QfOSx+YC3w2/ULUaHD3cA0AfgIaI
XiCxS/Y9vR8Cht0NlSDd9foT1Y1lVaNYlM+LTTGnYdeCI/tSvFXBOfIfoyCYWyzn
a6v2dxkzOx1DXlAJ80JWxiKVY94miBkIDmo5MG2suJIvSvtOkaSMNSODAp4IHecN
YTcOxUcPLGQvbGpEZI7LqxSpxl6SnPlTR/r1lUXXzPHFUjQj3P6zghobFlQx7ngm
dpkKsQa4UMt62DTt7R0vr0ma8KS9yBOJzJ5pbLQNUnVvoMxYPW1dG7jyNpGKY/QN
WoWGuamxWAGv+Ciywcx3T3t5KLPkGC94K07z0YeJlShHdE9xAgMBAAGgfTAtBgkq
hkiG9w0BCQ4xIDAeMBwGA1UdEQQVMBOGETY4LUE4LTZELTAyLTUxLTc0MEwGCSqG
SIb3DQEJBzE/DD1hYzE0ZjgxMjAwMDNjMzUxNTQ0NGNmZGM6NWM2MGYwNWYtMzk4
MC00MDk0LTgwM2MtNzJkODg3MGNkYWNlMA0GCSqGSIb3DQEBBQUAA4IBAQCrFDk7
Sa5W4ALsTNgCEewcsYJE1K8l/GWmXOgVIm31kssvj3OjaPcUYpr50qelZZWhcSlo
+EDNJyBbyXBgA6SkvbuNefRNoTx6YncOpKi92kHtddTD7LF1AodS0z1BuLM/zgJq
t+o2utt4WLo+ZoUtiTiCqRbSTmFjUNoh0PY/mHazwBfpNKe7Qbdu3BrWY07LHRM2
UNXsS/XhjDz5+Mc6jHeAVOseffGi+bMhuRCX36fOmloNqvvBQqBEk2YACHuEeHA9
EnFYk6+XhWCBo1scEJCrSMNHv0JtkF0vSeSpyvbzZMy+UPMtWBuIvS8jrHOXmKhn
41Fl29ZsTNGepJif
-----END CERTIFICATE REQUEST-----
2014-10-20 13:47:15.770 SPW[1366:507] transection id is BA9EF79E-9F01-4326-98C9-231A944708AD
2014-10-20 13:47:15.976 SPW[1366:507] 200
2014-10-20 13:47:15.977 SPW[1366:507] {
Connection = close;
"Content-Length" = 0;
Date = "Mon, 20 Oct 2014 11:47:15 GMT";
Server = "";
"Trans-Status" = Error;
}
Any idea why this is going wrong?
Regards
Peter
10-20-2014 09:56 AM
Peter,
If your ISE is 1.2.1, you would need to wait for the next patch (#3)
to use version 1.0.0.27 as it meant for Java-less provisioning.
You are likely running into this known defect — CSCur09439 ISE OS X 10.9.5 SCEP
EAP-TLS flow fails
Please Rate Helpful posts and mark this question as answered if, in fact, this does answer your question. Otherwise, feel free to post follow-up questions.
Charles Moreton
10-22-2014 05:04 AM
Just got official word from the Business Unit that the release of 1.0.0.29 and patches for ISE have been pushed back to nest week.
"Plan is to get 1.2.0 patch 12 tested with respective SPW and MAC agent for OSX 10.10 asap, then we follow with OSX 10.10 tested support in 1.2.1 patch 3.
Current ETA for 1.2.0 p12 is mid next week. Don't have ETA for 1.2.1 p3 as of yet. "
11-03-2014 07:27 AM
These files are now available for download.
ISE 1.2 patch 12
ISE 1.2.1 patch 3
ISE 1.3
All are now available on CCO
SPW for MAC 1.0.0.29 and 1.0.0.30
Open Caveats :
Refer ISE 1.2 Release note updates for detailed information on Patch 12
12-09-2014 09:18 PM
Attempted the Javaless BYOD onboarding for Mac OSX 10.10 yesterday with SPW 1.0.0.30. on ISE 1.2.1 running the latest patch. The process works very intermittently. Out of 10 attempts only 4 or 5 was completed.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide