08-19-2016 07:18 PM - edited 03-11-2019 12:00 AM
Hi,
We are designing a guest wireless solution for a customer who got offices across country
Requirements are
1. Bespoke service to each office. Captive portal should be customized to each office. I am planning to do using AP-names/location and implement a filter rule based on AP-name/location. There are about 25 locations. I may need to design 25 portals based on location.
2. Solution should support about 1500 guest Users.
3. Self & Paid advertisements should be supported.
4. Username & password via Email/mobile.
What type of licenses I need?. Do I need any policy license along with guest license for 1500 people? Do I need any advertisement license?
I have looked at the license prices. they are really expensive. I am not sure whether i am making any mistake or not.
Thanks,
Solved! Go to Solution.
08-20-2016 07:44 AM
Hi Karsten, you are correct. I should have answered more clearly.
ISE Express by itself comes with 150 licenses. One can add Base, Plus or Apex licenses "a la carte" to an ISE express installation - up to 5000 licenses total. However those are normal full-cost ISE licenses.
You would still have the limitation of the initial ISE Express server (single-site deployment only, and cannot participate in a larger ISE deployment nor can it be paired with another ISE appliance for high availability) unless you were to upgrade it to non-Express version using the R-ISE-GST-UPG-K9 SKU.
To the original poster, ISE Express (or even ISE evaluation license) would be a good entry point to do a proof or concept trial to see if the product meets the requirements.
08-19-2016 11:03 PM
Based on these requirements, the ISE Express could be a possible license for you which is much cheaper than the "normal" licenses:
http://www.cisco.com/c/en/us/products/security/identity-services-engine-express/index.html
08-20-2016 06:08 AM
Thanks Karsten,
Can ISE express return the radius attributes such as user-level to the WLC?. Is there any limitation in radius return attributes?
Internet content should be served based on guest's age. I am not sure whether it can do it.
thanks,
08-20-2016 06:57 AM
ISE Express is limited to 150 endpoints.
ISE Base license would more likely be indicated. The base license is not restricted as to what RADIUS attributes are returned. For a comprehensive listing of supported RADIUS A-V pairs, please refer to the following document:
https://communities.cisco.com/docs/DOC-67894
It is part of the larger set of pages linked from here:
https://communities.cisco.com/community/technology/security/pa/ise
You may also find the Cisco Wireless Guest Solutions comparison useful:
https://communities.cisco.com/docs/DOC-68732
08-20-2016 07:35 AM
Hi Marvin, there should be a license for up to 5000 guest users on ISE express. Have you any more info that this license is not available?
08-20-2016 07:44 AM
Hi Karsten, you are correct. I should have answered more clearly.
ISE Express by itself comes with 150 licenses. One can add Base, Plus or Apex licenses "a la carte" to an ISE express installation - up to 5000 licenses total. However those are normal full-cost ISE licenses.
You would still have the limitation of the initial ISE Express server (single-site deployment only, and cannot participate in a larger ISE deployment nor can it be paired with another ISE appliance for high availability) unless you were to upgrade it to non-Express version using the R-ISE-GST-UPG-K9 SKU.
To the original poster, ISE Express (or even ISE evaluation license) would be a good entry point to do a proof or concept trial to see if the product meets the requirements.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide