Cisco ISE in a multi-vendor environment
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
01-30-2013 04:05 AM - edited 03-10-2019 08:02 PM
Hi all
Would like to seek your feedback on using Cisco ISE is a multi vendor environment. We would like to use ISE to do 802.1x auth, profile and posturing on wired and wireless.
The wired is a mixture of Cisco switches and Alcatel switches.
The wireless is on Aruba AP/WLC
Have anyone got any experience in such successful role out?
Sent from Cisco Technical Support iPad App
- Labels:
-
AAA
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
01-31-2013 12:27 AM
This might help you out.
"Certain advanced use cases, such as those that involve posture assessment, profiling, and web authentication, are not consistently available with non-Cisco devices or may provide limited functionality, and are therefore not supported with non-Cisco devices. In addition, certain other advanced functions like central web authentication (CWA), Change of Authorization (CoA), Security Group Access, and downloadable ACLs, are only supported on Cisco devices.""
http://www.cisco.com/en/US/docs/security/ise/1.1.1/compatibility/ise_sdt.html
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
02-22-2013 02:00 PM
If you just want to authenticate endpoints through ISE, you can use non-cisco devices but if you want to use CoA, Posture etc. you have to use Inline posture node.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
03-06-2013 03:11 AM
Other Vendors Wireless access points support 802.1x authentication, however they don’t support other features provided by Cisco ISE. So in order to support those features we have to use IPEP.
You can refer following link for better understanding.
http://www.cisco.com/en/US/docs/security/ise/1.0.4/user_guide/ise10_ipep_deploy.pdf
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
05-21-2013 03:08 AM
review the below link:
.
http://www.cisco.com/en/US/docs/security/ise/1.0.4/user_guide/ise10_ipep_deploy.pdf
