Cisco ise Nagios monitoring trought OID

[Fabio885]

Question 

I have a Cisco ISE 2.6 rel. and i need to monitor his cpu, ram and storage trought my NMS Nagios. 

i configured correctly snmp v3 on cisco ise and from nagios side it can be pinged or snmpwalk to see entire mib.

Are there oid that provide me data usage of cpu/ram? i cant find it..

Or mybe is there a specific plugin. 

Thank you for your help.

[Fabio885]

Question 

I have a Cisco ISE 2.6 rel. and i need to monitor his cpu, ram and storage trought my NMS Nagios. 

i configured correctly snmp v3 on cisco ise and from nagios side it can be pinged or snmpwalk to see entire mib.

Are there oid that provide me data usage of cpu/ram? i cant find it..

Or mybe is there a specific plugin. 

Thank you for your help.

[Greg Gibbs · Accepted solution]

See this post on Monitoring ISE health using SNMP Polling for the MIBs supported by the ISE application.

The ISE SNS-34xx/35xx/36xx appliances are built on the UCS series servers. For hardware-related monitoring via SNMP, you'll need to look at polling the CIMC on the UCS server itself. Have look at the MIB Reference for Cisco UCS Standalone C-Series Servers.