07-15-2013 03:49 AM - edited 03-10-2019 08:38 PM
Hello,
I have Cisco ISE and Cisco IOS device. I have configured RADIUS in between these device.
Also I have configured RADIUSbetween Cisco ISE and Cisco ASA. Now I want to know that how to do posture assesment for these devices(Cisco ISE and Cisco ASA or Cisco ISE and Cisco IOS). Please give me whole steps to do posture assesment for cisco ios device in Cisco ise.
Also, please provide me logs related to posture assesment and client provisioning.
Thanks in advance.
Solved! Go to Solution.
07-16-2013 05:42 AM
You may go through the below listed link to download a PDF link
Posture assessment with ISE.
http://www.cisco.com/web/CZ/expo2012/pdf/T_SECA4_ISE_Posture_Gorgy_Acs.pdf
~BR
Jatin Katyal
**Do rate helpful posts**
07-16-2013 05:42 AM
You may go through the below listed link to download a PDF link
Posture assessment with ISE.
http://www.cisco.com/web/CZ/expo2012/pdf/T_SECA4_ISE_Posture_Gorgy_Acs.pdf
~BR
Jatin Katyal
**Do rate helpful posts**
07-16-2013 05:44 AM
Thanks Jatin.
You have log sample for the same ?
07-16-2013 06:01 AM
I can't commit however will try.
~BR
Jatin Katyal
**Do rate helpful posts**
07-16-2013 06:15 AM
ok. Please try and let me know.
Thanks,
07-17-2013 10:21 PM
Hello Jatin,
Any update regarding above query ?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide