11-29-2018 01:08 AM
Hi
My ISE has NTP server configured , from the below output it synchronizes with the server but does not get the correct time when I output show clock
show ntp
Configured NTP Servers:
172.16.5.1
synchronised to NTP server (172.16.5.1) at stratum 9
time correct to within 452 ms
polling server every 64 s
remote refid st t when poll reach delay offset jitter
==============================================================================
127.127.1.0 .LOCL. 10 l 700 64 0 0.000 0.000 0.000
*172.16.5.1 LOCAL(1) 8 u 19 64 377 0.340 5.481 3.332
* Current time source, + Candidate , x False ticker
Warning: Output results may conflict during periods of changing synchronization.
Solved! Go to Solution.
11-29-2018 02:39 AM
11-29-2018 01:37 AM
- Is the timezone on ISE configured correctly ?
M.
11-29-2018 01:42 AM
Also, if timezone is correct, try reloading.
11-29-2018 02:39 AM
11-12-2019 03:43 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide