Hi I need help in installing cisco ise agents from windows 2016 server to windows 10 PCs. I have tried following a couple of online articles but they just dont work. Need to know what I'm missing here, I'm sure its doable. or can anyone point me to a...
Hi I have a 3850 switch and to it is connected my pc with the ip 172.24.0.253. My gateway which is an svi on the switch is 172.24.0.254. The switch has a layer 3 port whose IP is 172.30.0.2. I can ping my PC from the switch but when I introduce the ...
HiMy ISE has NTP server configured , from the below output it synchronizes with the server but does not get the correct time when I output show clock show ntpConfigured NTP Servers: 172.16.5.1synchronised to NTP server (172.16.5.1) at stratum 9 ti...
Hi
below is an output of show ip route from my router that runs ospf. The routes are ospf type 2 routes and for some reason they are not working. I have come to this conclusion by randomly replacing some of those type 2 routes with static routes whi...
Hi all
I have two routers running BGP with the below configs. I am getting a new router which is to run VRFs and replace the 2 routers. I'm trying to configure per VFR BGP but it appears the router can only have one AS number. Can anyone help with ...
Hi Balajihere it is. I didn' really understand your last question Switch#*Oct 25 12:56:42.352: ICMP: dst (8.8.8.8) host unreachable sent to 172.24.0.253*Oct 25 12:56:43.353: ICMP: dst (8.8.8.8) host unreachable sent to 172.24.0.253*Oct 25 12:56:44.3...
Hi Georg pinging from both the 172.30.0.2 and the loopback doesn't generate any debug messages . The ping fails and nothing is displayed from the switch. Also removing the vlan and re-adding it hasn't worked.
Hi Balaji, here are the outputs Switch#show ip interface briefInterface IP-Address OK? Method Status ProtocolVlan1 unassigned YES unset up downVlan100 172.24.0.254 YES manual up upVlan110 172.19.1.20 YES manual down downGigabitEthernet0/0 unassigned...
Hi Georgthese are some of the output when I ping from my PC. the ping to the quad 8 was not intentional but curious why its telling me time exceeded. *Oct 25 09:39:13.660: ICMP: echo reply sent, src 172.30.0.2, dst 172.24.0.253, top ology BASE, dscp ...
