03-31-2020 02:09 AM
dear all. i am preparing ccnp. i am practicing cisco ise on eve-ng. i have added one switch one CA server, DC server, and ISE. i configured switch for authentication. a have added ISE's ip address to switch in order to see some logs from switch. When i connect win7 computer to switch, in the switch cli i see log that shows it is failed to be authenticated. but i dont see anything on ISE Radius Livelog. could you please tell me where i made mistake. I guess ISE not sync with switch. I am new on ISE and try to learn.
Solved! Go to Solution.
03-31-2020 04:57 AM
Hello Cristian
The link you send seems to be very good documentation. let read entire chapter. if i fail once more again i will turn you back. thank you so much
03-31-2020 02:59 AM
03-31-2020 04:57 AM
Hello Cristian
The link you send seems to be very good documentation. let read entire chapter. if i fail once more again i will turn you back. thank you so much
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide