cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
365
Views
0
Helpful
2
Replies

Cisco Secure ACS 4.2

GRANT3779
Spotlight
Spotlight

Hi,

Is this software Out Of Date? This is what we run at the moment for authentication, but not to sure if theres a "bigger newer" piece of software out there for TACACs authentication?

I'm also looking to limit certain users and only have limited commands available to them when logging into devices through TACACs. Is this something I can achieve via ACS?

Thanks

2 Replies 2

edwjames
Level 3
Level 3

Hi Grant,

ACS 4.2:

http://www.cisco.com/en/US/prod/collateral/vpndevc/ps5712/ps2086/end_of_life_notice_c51-664639.pdf

The above link will guide you.

ACS 5 is the newer, bigger piece, currently in its 4th Gen (ACS 5.4).

For your second question:

http://www.cisco.com/en/US/products/sw/secursw/ps2086/products_configuration_example09186a00808d9138.shtml

Rate if useful

**Share your knowledge. It’s a way to achieve immortality. --Dalai Lama** Please Rate if helpful. Regards Ed

Jatin Katyal
Cisco Employee
Cisco Employee

Further to what Edward sugested, Identity management has gone way ahead.

We have ACS 5.x and ISE these days in the market and both are showing excellent performance. As of now, ISE doesn't support TACACS. However, it will be there soon.

ACS 5.x require 500Gb of hard disk space configured in the ESX virtual machine for it to install and run correctly. Virtual machines configured with less than 500Gb hard disk  or equal to 60 GB will be considered as EVALUATION version and TAC support will be limited on it.

Installing ACS in a VMware Virtual Machine

http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.4/installation/guide/csacs_vmware.html

FAQ's Cisco Secure Access Control System 5.4

http://www.cisco.com/en/US/prod/collateral/netmgtsw/ps5698/ps6767/ps9911/qa_c67-718298.html

In case you are intrested to perform command authorization based on your AD groups with ACS 5. here is a link for your ready refrence.

ACS 5.x: TACACS+ Authentication and Command Authorization based on AD group membership Configuration Example

http://www.cisco.com/en/US/products/ps9911/products_configuration_example09186a0080bc8514.shtml

Let us know in case you still have any query or concern.

Jatin Katyal
- Do rate helpful posts -

~Jatin