expanding the NIC on a Cisco 3315 NAC/ISE appliance

[lanny-8080]

Hi All,

Is it possible to add another NIC to the Cisco 3315 NAC appliance. It ships with Four ethernet interfaces, but would like to add at least 1 extra interface i.e. PCI card if possible

thanks

LD

[Jatin Katyal]

Other interfaces can be used for the various probes, like SPAN, DHCP, etc.  Also for inline posture, you can see there are multiple interfaces needed when using high availability.

References:

ISE Config Guide - Configuring Probes (note the various probes that have an interface option)

http://www.cisco.com/en/US/partner/docs/security/ise/1.1.1/user_guide/ise_prof_pol.html#wp1555646

Cisco Identity Services Engine User Guide, Release 1.1.1, Setting up Inline Posture

Figure 10-4 Inline Posture Routed Mode High Availability Example

http://www.cisco.com/en/US/partner/docs/security/ise/1.1.1/user_guide/ise_ipep_deploy.html#wp1140749

Jatin Katyal


- Do rate helpful posts -