08-05-2015 02:23 AM - edited 03-10-2019 10:57 PM
Hi Expert,
As we check on Cisco ISE 1.4 document as line below we found this case support WLC 5508 version 7.6.130
http://www.cisco.com/c/en/us/td/docs/security/ise/1-4/compatibility/ise_sdt.html?referring_site=RE&pos=1&page=http://www.cisco.com/c/en/us/td/docs/security/ise/1-1/compatibility/ise_sdt.html
But as check with Cisco WLC5508 version 7.6.130.0 release found support only ISE 1.2
http://www.cisco.com/c/en/us/td/docs/wireless/controller/release/notes/crn76mr03.html
And for WLC 8.0.115.0 show support ISE1.3
http://www.cisco.com/c/en/us/td/docs/wireless/controller/release/notes/crn80mr1dot5.html
But on Wireless Compatibility matrix show only version ISE1.3
http://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html
So we want to know the WLC version 7.6.130.0 and 8.0.115.0 can support ISE 1.4 or not ?
Cheers,
FN
Solved! Go to Solution.
08-05-2015 08:04 AM
Yes, they will both work with ISE 1.2, 1.3 and 1.4, it's probably just the case of that specific WLC version has only been tested with the ISE version that was out at the time.
08-05-2015 08:04 AM
Yes, they will both work with ISE 1.2, 1.3 and 1.4, it's probably just the case of that specific WLC version has only been tested with the ISE version that was out at the time.
08-14-2015 05:43 AM
My engineer just spent all night w/ ISE 1.4 and we are running WLC 5508 with 8.0.115.0. It does not seem to work.
08-14-2015 07:46 AM
Sorry to hear that, what is it specifically that doesn't work ?
08-15-2015 07:49 PM
Just basic authentication of clients. Worked right away when installed 1.3.
BTW, if you look at the matrix, 1.4 is not supported w/ WLC 8.x
08-16-2015 03:40 AM
Sounds odd, i don't see any reason why 1.4 wouldn't work with 8.0.115.0, except a bug. I have 1.4 running at several customers, with no issues at all. What authentication are you doing? guest, peap, eap-tls?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide